160 mhz saw filter 4 mhz bandwidth part number: SF0160CD02254T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0160CD02254T rev a 11-mar-2010 ecn 36650 page 1 of 3 description ? 160 mhz saw bandpass filter with 4 mhz bandwidth. ? 22.1 x 12.7 mm dip package. ? rohs compliant. typical performance horizontal: frequency : 2 mhz/div vertical from top: relative magnitude : 10 db/div relative magnitude : 1 db/div phase linearity : 5 deg/div group delay : 100 ns/div s11 (150 to 170 mhz) s22 (150 to 170 mhz)
160 mhz saw filter 4 mhz bandwidth part number: SF0160CD02254T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0160CD02254T rev a 11-mar-2010 ecn 36650 page 2 of 3 specification parameter min typ max units center frequency (fc) 1 159.90 160.00 160.10 mhz 3 db bandwidth 4.00 4.17 - mhz 40 db bandwidth - 5.28 5.80 mhz device delay - 2.76 - sec insertion loss 23.3 25.0 db phase linearity 2 - 2.7 5 deg p-p passband variation 2 - 0.45 0.7 db p-p rejection (10 to 156 mhz) 50 54 - db rejection (156 to fo-2.9 mhz) 45 48 - db rejection (fo+2.9 to 164 mhz) 45 48 - db rejection (164 to 280 mhz) 50 54 - db source and load impedance - 50 - ohms ambient temperature - 25 - c notes: 1. all specified bandwidths are cent ered at or referenced to this frequency. 2. computed as the delta of the highest an d lowest points inside the 3 db bandwidth. maximum ratings parameter min typ max units storage temperature range -40 25 85 ? c input power level - 10 13 dbm matching circuit typical component values: notes: 1. recommend use of 2% tolerance ma tching components. inductor q=45. 2. component values are for reference only and may change depending on board layout. ls1 = 100 nh ls2 = 100 nh cp1 = 33 pf cp2 = 24 pf input 50 ? single-ended output 50 ? single-ended 1 7 14 8 ls1 ls2 cp1 cp2
160 mhz saw filter 4 mhz bandwidth part number: SF0160CD02254T spectrum microwave 400 nickerson road, marlbo rough, ma 01752, usa ? phone 1-508-251-6400 ? fax 1-508-251-6401 www.spectrummicrowave.com dsSF0160CD02254T rev a 11-mar-2010 ecn 36650 page 3 of 3 package outline iso 9001 registered all specifications are believed to be accurate and reliable. howe ver, spectrum microwave reserves the right to make changes wit hout notice. ? 2010 all rights reserved. units: mm tolerances are 0.15 mm except where indicated and for the overall length and width, which are nominal values. pin configuration: input: 1 input return: 14 output: 7 output return: 8 ground: 2,9
|
